The INTELLINET NETWORK SOLUTIONS Pro Series Network Dome Camera is designed for security surveillance applications and comes fully equipped with state-of-the-art features that set it apart from other network cameras on the market today.
Vandal-Proof Dome Housing Not only is the housing small and discreet, it can also take a beating. Thanks to heavy-duty aluminum and the use of tamper-proof screws, the Network Dome Camera is well-protected.
Excellent Video Quality The INTELLINET NETWORK SOLUTIONS Pro Series Network Dome Camera combines excellent image quality and very high light sensitivity for low-light video surveillance. The integrated Sony Super HAD CCD image sensor provides an astonishing 620 TV lines of image resolution — and it shows: Now you can really enjoy brilliant full-motion video in DVD resolution.
SSL Encryption Secure network connections using data encryption between the camera and the network client means additional data security.
Dual Mode: Simultaneous MPEG4 + Motion-JPEG Streaming The Pro Series Network Camera supports MPEG4 as well as Motion-JPEG video formats, providing superior quality and, at the same time, continuing to support existing applications (the law in most countries only accepts JPEG video format as evidence in court). MPEG4, on the other hand, allows you to transmit a larger amount of data over the same amount of bandwidth while providing smooth and seamless viewing.
Bi-Directional Audio Support Attaching a microphone and loudspeakers to the Pro Series Network Camera will allow you to listen and talk using the two-way audio support. This is ideal for most security and surveillance applications, but can be applied to provide cost-effective video conferencing, as well.
Power over Ethernet The Pro Series Network Camera supports the 802.3af standard, allowing it to be installed in locations where an AC power source is not readily available. Simply plug the camera into a PoE-compliant switch and begin transmitting power as well as data over the Cat5e or Cat6 network cabling.
Lifetime Warranty Strict manufacturing standards ensure the highest quality in all INTELLINET NETWORK SOLUTIONS products. All items carry a full Lifetime Warranty — the strongest quality commitment anyone can make.
High-resolution (620 TV lines) 1/3" Sony Super HAD CCD image sensor for excellent image quality
Vandal- and tamper-proof aluminum housing
Up to 25 frames per second in all image resolutions
Supports image resolutions up to 720 x 576 (D1)
Supports simultaneous MPEG4 and Motion-JPEG image compression
Supports MPEG4 video streaming with CBR (constant bit rate) and VBR (variable bit rate) modes
Supports HTTPS encryption for enhanced security
RTSP (Real-Time Steaming Protocol) support
Supports IEEE 802.3af Power over Ethernet injectors, mid- and endspans
Controllable frame rate
Video access through any standard Web browser
Additional administrator functions include disabling the camera LEDs during operation, disabling audio and/or video
Audio support, full duplex, up to 3.4 kHz
External microphone input connector
External speaker output connector
Terminal block for external sensors or external alarm devices
Integrated HTTP Web server supporting 50 simultaneous user connections
Integrated e-mail, FTP, DDNS and DHCP client
Integrated motion detection with pre- and post-alarm image/video buffering
Event-triggered FTP and e-mail upload of still images and videos
Extensive HTTP API for software integration and remote programming operations
Including Windows-based IP Installer and Multi-Viewer software for up to 4 cameras
Lifetime Warranty
Standards
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3af (Power over Ethernet)
General
32-bit ARM9 RISC CPU
16 MByte video frame buffer
Image buffer: 200 frames (CIF)
8 Mbyte flash memory
32 Mbyte SDRAM
Supported image resolutions: D1 (720 x 576), VGA (640 x 576), CIF (352 x 288)
Audio support:
- Full duplex
- Bandwidth: 300 Hz to 3.4 kHz
- Audio input: 3.5 mm / 1.8" microphone input jack
- Audio output: 3.5 mm / 1.8" speaker output jack
Certifications: FCC Class B, RF: EN300328, EMC: EN301489-1/-7, Safety: EN60950-1
Image Sensor and Lens
1/3" Sony Super HAD CCD sensor
440k pixel resolution (752 H x 582 V)
High resolution: 620 TV lines (HQ1)
S/N ratio: > 48 dB
Video output: 1.0 Vp-p (75 Ohms, composite)
Automatic white balance control
Automatic back light compensation
Image control: Brightness, Contrast, Saturation, Hue and Color Killer
Electronic shutter: 1/50 - 1/100,000 sec.
Minimum illumination: 0.5 lux at F1.2
4-9 mm vari-focal auto-Iris lens
LEDs
Power
Network connection
Camera operation
Environmental
Dimensions: 160 (D) x 110 (H) mm (6.29 x 4.33 in.)
Weight: 1.0 kg (2.20 lbs.)
Operating temperature: -10 – 50°C (14 – 122°F)
Operating humidity: 20 – 80% RH, non-condensing
Storage temperature: -10 – 60°C (14 – 149°F)
Power
External power adapter: 12 V DC, 1.5 A
Power consumption: 3.0 Watts (maximum)
System Requirements
Windows 2000, XP, Vista, Linux, Mac OS X
Computer with network connection
Web browser support:
- MS Internet Explorer 5.0 or higher (ActiveX + Java)
- Mozilla 1.x, Mozilla Firefox (Java)
- Netscape Navigator 6.0 or higher (Java)
- Opera (Java)
- Safari (Java)
- Konqueror (Java)
Added custom SMTP port option. Default port 25 can now be changed
Fixed problem related to DHCP causing the camera to reboot
Motion detection now available in QVGA mode
Fixed PLAIN authentication method for SMTP
Several fixed concerning motion detection addressed
Changes 4.74 -> 4.78:
Added frame rate parameter to image.cgi command for mode = http
Example - Frame rate = 1
http://camera_IP/image.cgi?id=guest&passwd=guest&mode=http&fr=1
Example - Frame rate = 10
http://camera_IP/image.cgi?id=guest&passwd=guest&mode=http&fr=10
Change behavior: The global frame rate parameter in the
camera's image settings is no longer being ignored when
using the image.cgi command in http mode (see 1.)
This means, that if the global frame rate is set to "5",
the M-JPEG stream will only stream at 5 fps max.
Added a new CGI command to query the alert state of the
internal event trigger.
Syntax: http://camera_IP/alert_state.cgi?id=admin&passwd=admin
Returns:
Fixed incompatibility problem with certain SMTP servers
Fixed Motion-JPEG streaming problem which could lead to
interruptions of the video stream
Removed user based frame rate control to increase overall
performance of the camera
Fixed bug concerning the NTP Server (when adding an SMTP
server, the camera time would jump forward by 30 mins).
Changes 4.2 -> 4.51:
Resolved remote viewing problem concerning NAT
and MS Internet Explorer ActiveX access
HTTP API: Added a new varibale to return the camera configuration
as an XML formatted document
http://camera_address/inquiry.cgi?id=admin&passwd=admin&inq=xm
Fixed and cleaned up existing HTTP inquiry.cgi commands
Fixed Digital I/O connector function in Event Trigger Configuration
NOTE:
1. The camera loses all settings but its IP Address during the firmware update. You need to re-configure the settings after the update is completed.
2. The new firmware demands that an updated ActiveX control (mwviewer.ocx) be installed on systems accessing the camera via MSIE/ActiveX. Administrator rights on the computer are required to do the installation (automatic installation after MSIE web browser connects to camera).
Installation instructions:
1. Download and uncompress the file CCD_wired_4.80.zip
2. Start the upgrade utility upgrade_1010.exe.
3. Refer to the included readme file for more information.
