The INTELLINET NETWORK SOLUTIONS NFC30 Network Camera is designed for security surveillance applications, and comes fully equipped with state-of-the-art features that set it apart from other network cameras on the market today.
Excellent Video Quality Because the NFC30 Network Camera uses a progressive-scan CMOS sensor, it provides sharp video images with dramatic lifelike color representation.
Auto-Setup No need to worry about complex network setup procedures. The installation wizard provides an easy setup that allows a non-technical person to begin using the camera right away.
SSL Encryption Secure network connections using data encryption between the camera and the network client for additional data security.
Dual Mode: Simultaneous MPEG4 + Motion-JPEG Streaming The NFC30 Network Camera supports MPEG4 as well as Motion-JPEG video formats, providing superior quality and, at the same time, continuing to support existing applications. MPEG4, on the other hand, allows you to transmit a larger amount of data over the same amount of bandwidth while providing smooth and seamless viewing.
Bi-Directional Audio Support Attaching a microphone and loudspeakers to the NFC30 Network Camera will allow you to listen and talk using the two-way audio support. On top of that, the camera is equipped with an internal microphone. This is ideal for most security and surveillance applications.
Integrated DDNS Client Utilize the free DYNDNS service (like DYNDNS.org) in order to connect to your camera, even if you do not have a static IP address assigned by your ISP (Internet service provider). This feature lets you easily set up a URL that can be used to access the camera through the Internet using any Web browser.
Unique Windows Live Messenger Support Set up a free MSN / Hotmail account for the network camera and connect to it via Windows Live Messenger as if it were a regular contact in your buddy list. Remote access cannot be any easier.
Power over Ethernet The NFC30 Network Camera supports the 802.3af standard, allowing it to be installed in locations where an AC power source is not readily available. Simply plug the camera into a PoE-compliant switch and begin transmitting power as well as data over the Cat5e or Cat6 network cabling.
Excellent image quality with 30 fps full-motion video in all resolutions
Progressive-scan image sensor with OmniPixel2 technology
Supports image resolutions up to 640 x 480 (VGA)
Audio support, full duplex, up to 8 kHz, with integrated microphone
Video access through any standard Web browser
Integrated motion detection with pre- and post-alarm image/video buffering
Event-triggered FTP and e-mail upload of still images and videos
External microphone input connector
External speaker output connector
Terminal block for external sensors or external alarm devices
Supports simultaneous MPEG4 and Motion-JPEG image compression
Selectable video buffer for smoother video streaming
Controllable frame rate
Supports MPEG4 video streaming with CBR (constant bit rate) and VBR (variable bit rate) modes
Supports low light conditions, minimum 0.5 lux
Mobile phone streaming live video through 3GPP / ISMA / RTSP
Mobile phone live image through 2.5 WAP
Windows Live Messenger support
Supports privacy zone and text overlay functionality
MPEG4 + Motion-JPEG + 3GPP mobile phone streaming, audio and 10x digital zoom
Supports HTTPS encryption for enhanced security
Supports UPnP with UPnP port forwarding capability
Integrated e-mail, FTP, DDNS and DHCP client
Supports IEEE 802.3af Power over Ethernet injectors, mid- and endspans
Easy-to-use 16-channel camera viewing and recording utility included (not compatible with NSC10 and NSC18 cameras)
Three-Year Warranty
Standards
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3af (Power over Ethernet)
General
32-bit ARM9 RISC CPU
8 MByte flash memory
64 MByte SDRAM
Supported image resolutions: 640 x 480, 320 x 240 and 160 x 120
8 IEEE 802.3af-compliant RJ45 PSE/PoE output ports for signal and data
Power output up to 15.4 Watts per port
19" rackmount metal case
LEDs for power and PD link
Lifetime Warranty
Model: 502931
Power over Ethernet (PoE) Injector 1 Port, 48 V DC, IEEE 802.3af Compliant
Ideal when AC power is not available
Full-power Class 3 PoE design
Power output of up to 15.4 Watts
Supports all IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras)
Supports IEEE 802.3af detection and short circuit, overload and high-voltage protection
